Active Silicon FrieBird
Description
- CoaXPress v2.1 frame grabber.
- Supports CoaXPress speeds up to CXP-12.
- Four connections for up to four CXP-12 cameras.
- Fast PCI Express 3.0 (Gen3) 8-lane interface.
- ActiveDMA engine – acquisition with zero CPU usage.
- Comprehensive I/O including end bracket I/O.
- Supports PoCXP (Power over CoaXPress).
- HD-BNC (Micro-BNC) connectors.
- Standard half-length PCIe form-factor.
- Full GenICam support in Windows or Linux (including GenTL Producer).
- Supported by the proven ActiveSDK.
| Model | 介面 | Buffer Memory | PCI Express | I/O |
| IFG-AS-FBD-4XCXP12-3PE8 | CoaXPress | Up to 5 GBytes of DDR4 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus. |
Eight-lane Gen3 interface typically providing 6.8 Gbytes/sec transfer from FireBird to the PC, subject to PC performance. |
The following I/O lines are provided for triggers,optical shaft encoders,
exposure control and general I/O: ‧4 opto-isolated inputs. ‧4 opto-isolated outputs. ‧4 TTL inputs, 5V tolerant. All these I/O signals are provided on a 50-way header onthe FireBird board.
A 15-way D-Type connector is located on the end panelbracket and allows access to a subset of the above I/O: ‧4 opto-isolated inputs. ‧4 opto-isolated outputs. ‧4 TTL inputs, 5V tolerant.. ‧4 TTL I/O, 5V logic. ‧4 RS-422 inputs. ‧4 RS-422 outputs |